Skip to product information
1 of 2

Pro-Drive Fasteners®

18 GA Straight "Slight Head" Finish Nails

18 GA Straight "Slight Head" Finish Nails

Size and Count
Pro-Drive Fasteners® Electro Galvanized Straight Strip "AX" style Slight Head Finish Nails are the strongest on the market and are rust resistant. They will fit all standard straight 18 GA nailers or your money back.
  • Smaller nail head decreases labor required to fill nail holes
  • Interior finish and trim
  • Molding
  • Decorative trim
  • Cabinets
  • Picture frames
  • Ornamentals
  • Electro Galvanized Premium Steel for rust resistance
  • Smooth shank
  • Standard medium head (Senco style AX series) for maximum hold
  • Meets ASTM F1667
  • Blunt chisel point reduces splitting
  • Heavy duty reinforced and resealable boxes
  • Convenient job pack quantities in resealable box
  • Contractor tested and proven

Not recommended for ACQ Treated Lumber. Over time these staples may corrode, due to Galvanization thickness, not intended to prevent rust on exterior applications. To ensure maximum protection, use Stainless Steel type 316 staples.

WARNING: This product contains Nickel, a chemical known to the State of California to cause cancer. For more information go to

Interchangeable Fasteners: 
Atro® TI-PIN, BeA® SK300, Bostitch® SB-1842BN (5/8" to 1-5/8"), SB-1850BN (5/8" to 2"), BT35B (5/8" to 1-3/8"), BT50B (1-3/16 to 2"), SB-2IN1, T29-30 (5/8" to 1-3/16"), T31-1B (5/8", BT1300, BT125SK2, BT200K2, SKN12, DeWalt D51238K (5/8" to 2"), , Duo-Fast® B4400, Fasco® F20P GN-31, F20T GN-40 CT, R3C F26C GN-50 SS (CT), F21T GN-40A CT ,Hitachi® NT45A (1" to 1-3/4"), NT50AD (1" to 2"), NT32AE (5/8" to 1-1/4"), NT50AE (3/4" to 2"), MAX® NF201/18-35 (3/8" to 1-1/4"), NF221/18-55 (5/8" to 2"). Paslode®IM200Li.2, IM200Li, T200-F18P, 2138-F18II, IM200-F18, T125-F18 (5/8" to 1-1/4"), T200-F18 (5/8" to 2"), Porter-Cable®  BN125 (5/8" to 1-1/4"), BN200 (3/4" to 2") , BN12SA,  Senc, Air Free 25 (5/8" to 2-1/8"), Finish Pro 15 (5/8" to 1-1/4"),18 (5/8" to 2"), 25, 25XP (5/8" to 2"), 2N1 (5/8" to 1-1/4"), SLP20 (to 1-1/2"), LS4 & LS5 (to 1-5/8"),  and most other 18 gauge brad nailers.

Always refer to tool owner’s manual to insure you have selected the correct fastener.

The products made and sold by Pro-Drive Fasteners® have no relationship with any of the other companies whose trademarks or item numbers that are mention above.


View full details