FS-150-5000
1-1/2" (38mm) Flooring Staple
- 15.5 GA
- Electro-Galvanized
- Chisel Point
JOB PACKS
5,000 count · 18.2 lbs
Contact for Pricing →Patent #20220388265A1
Tipper-De-Tipper
Series 5
The safest and fastest method to replace mallet caps. 5-station design fits all major brands of round or angle rubber caps. Under 30 seconds. Virtually no maintenance.
MADE IN USA
5-STATION DESIGN
UNDER 30 SECONDS
Series 5 available now. Contact us for current pricing and availability.
Eliminates Risk of Injury
No more forcing caps off with screwdrivers or other tools.
5-Station Design
Fits all major brands of Round or Angle rubber caps.
Replaces & Removes
Caps swapped in under 30 seconds.
Robust Construction
Virtually no maintenance required.
The Complete Story
The safest and fastest method to replace mallet caps. Eliminates risk of injury. Replaces and removes caps in under 30 seconds. Robust construction with virtually no maintenance. 5-station design fits all major brands of round or angle rubber caps.
Patent #20220388265A1 · Made in the USA.
Series 5 — In Action
Commercial
Tipper-De-Tipper Series 5 — Full Commercial
The complete commercial spot for the Series 5.
Operation Guide
How to Use the Tipper-De-Tipper
Step-by-step operation guide — tipping and de-tipping demonstrated.
Installing a Cap — Tipping
Step 1 of 3
Place cap onto the tipping station.
Step 2 of 3
Align mallet head and press down.
Step 3 of 3
Cap seats firmly — ready to use.
Removing a Cap — De-Tipping
Step 1 of 3
Seat the capped mallet head into the de-tipping arm.
Step 2 of 3
Lock the head under the arm and hold the handle.
Step 3 of 3
Lever the handle down — the worn cap pops free.
Ways To Mount The Tipper-De-Tipper
The Series 5 bolts down through its base plate, so it mounts anywhere you have a solid, flat surface — a bench, a counter, a rolling tool-box top, or a wall-hung station.
Exclusive manufacture of Tipper-De-Tipper™ removes & replaces any caps in less than 1 minute.
Wall-Mounted Station
Bolted to a Pro-Drive HD wall station
Mounted on a wall-hung bench with the Pro-Drive HD banner overhead — the retail and warehouse setup. Caps and mallets stay within arm's reach.
Rolling Tool Box
Bolted to a rolling tool-box top
Fastened to a plank top on a rolling tool box so the station travels with the crew and parks out of the way between jobs.
Bench Or Counter
Bolted flat to a bench top
Bolted flat to any bench, counter, or work table. The lever needs clear space overhead and nothing else.
Bolt Pattern
Four bolts through the base plate
Drill through the top and run bolts up through the base plate. The pattern is symmetrical, so the unit can face either direction.
Fasten The Bolts
Torque the base bolts down snug
Snug the bolts down and the base plate sits dead flat — no rocking under the lever, no maintenance afterward.
Explore More
Related Products
BRAD18
18 GA Brad Nailer
- 18 GA
9.7"x2.4"x9.9"; 70-110 psi; 110 brad capacity; 5/8" to 2" range
Contact for Pricing →A11-10D
A11 Pad Staple
- 20 GA
- 15/32" Crown
- E-G Galvanized
- Chisel Point
JOB PACKS
5,000 x 20
Contact for Pricing →Legal · Compliance · Compatibility
⚠️ CA Prop 65: This product can expose you to chemicals including Nickel and Lead. For more information visit P65Warnings.ca.gov.
This product is made and sold by Pro-Drive Fasteners® and has no relationship with any of the other companies whose trademarks or item numbers are mentioned above. All brand names and trademarks are the property of their respective owners.
Tipper-De-Tipper — Specification Table
| Item # | Product |
|---|---|
| TDT-S5 | Tipper-De-Tipper Series 5 |